|
|
Small Sample Heater
Temperature Control for Small Measurement Samples
The Nanosurf Temperature Controller and Small Sample Heater provide a convenient way to control the temperature of your samples before or during measurements. The Sample Heater replaces the Sample Holder as sample mount and allows heating of samples from room temperature up to 120°C. The temperature can be set manually on the controller, or via the supplied PC software (requires a USB connection). Temperature setpoints, temperature ramps and temperature cycles can also be programmed into the controller.
Specifications
Temperature Controller:
- Closed loop controller: Digital PID loop
- Auto PID parameter tuning: Yes
- Heating/cooling ramps and temperature cycle profiles: Yes
- Heating type: Linear DC heating power
- Max heating power: 5 W
- Sample platform sensor: PT100 thermo-resistive sensor
- External temperature sensor: K-type thermo coupler
- Power supply: 100–240 V AC
- PC connection: USB
Sample Heater:
- Temp range: RT–120°C (1) or RT–80°C (2)
- Temp stability: 0.1°C (3)
- Heating rate: up to 13°C in 10 seconds (3)
- Cooling rate: up to –3°C in 10 seconds (3)
- Heating power: max. 5 W
- Heating platform: size 26 mm (inner disc diameter)
- Temperature sensor: PT100 type; embedded in the center of the heating platform
- Low drift materials Sample Stage: ultra low expansion glass ceramics; heating platform: Invar
(1) Suggested max. temperature for the Nanosurf FlexAFM
(2) Suggested max. temperature for all other AFM systems
(3) Depending on sample mass
|
|
