Xplore Micro Cast Film Line CFPL
Xplore has manufactured two types of cast film lines, the 35 and 65 mm wide two calender instruments. Via micro-stepping* we achieve accurate control of the cast and winder calenders; it enables a reliable and fast screening of new film formulations. However, with slippery films, often slip occurs around the cast roll, which causes difficulties […]
Xplore Micro Cast Film Line CFL 65
To offer more R&D possibilities, we now have a high tech 65 mm wide cast film line with dedicated temperature control. This will guarantee a more controlled process and larger test samples for testing of optical, mechanical and/or barrier properties.
Xplore Micro Cast Film Line CFL 35
This micro cast film line is based on Xplore’s proprietary technology. In combination with our micro compounder, it is now possible to obtain cast film with just 5 g of material in 10 minutes. In this way, material need and development time is drastically reduced, and considerably less R&D budget is needed.
Xplore Microfiber Line
This innovation enables you to obtain mono or multi-filament fibers from small amounts of material in 10 – 15 minutes. Material need and development time are drastically reduced, and considerably less R&D budget is needed.
Xplore Micro 3D Filament Line
Xplore Instruments BV introduces a 3D print filament screening add-on that enables you to produce filaments Fused Filament Fabrication using polymeric materials with good dimensional stability from small amounts of material. This 3D filament R&D line is a unique asset for the development of nascent filament compositions.
ParticleX Gunshot Residue (GSR) Example Report
Sample Information: Samples are collected by stubbing hands, clothing, or environments that have been near a discharged firearm. This stub can be directly placed into the Phenom XL Desktop SEM sample stage and analyzed using ParticleX GSR. Report includes the following: To learn more about the ParticleX GSR solution, watch our webinar, Tiny Residue, Big […]
Xplore MC 40 Brochure
This high torque lab compounder, with a capacity of 40 ml, will improve your R&D performance by its reliability, ease of use and robustness. It is a unique asset for you in the development of new material compound formulations: a full-fledged material processing instrument with a slightly larger batch size that still fits on your […]
Xplore MC 15 HT Brochure
This high torque micro compounder, with a capacity of 15 ml of material, will improve your R&D performance by its reliability, ease of use and robustness. It is a unique asset for you in the development of new material compound formulations: a full-fledged material processing instrument that fits on your laboratory bench or in your […]
Xplore MC Xperience Brochure
Xplore developed a twin-screw micro compounder with a capacity of just a few grams of material. This micro compounder, which is the smallest in the world, is a unique asset for the development of new material compound formulations. It will improve your R&D by delivering reliable, reproducible and fast test results. A full-fledged material processing […]
ParticleX Technical Cleanliness Example Report
Sample Information: Particles are collected on a filter through rinsing the component in a clean environment to minimize additional contamination. The washed surface area is approximately 500 cm2. The filter containing the particles was then dried and loaded into the sample stage using a Filter Stage Insert to firmly secure it, then analyzed in the […]